D100ED40

Urgent Automation is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply.

Product comes with Urgent Automation's 1-year warranty.

Rated 4.7 with 11 reviews

Rockwell Disclaimer: The product is used surplus. Urgent Automation is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Urgent Automation is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, Urgent Automation makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Urgent Automation also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Urgent Automation also makes no representations as to your right to install any such firmware on the product. Urgent Automation will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


D100ED40

Description: Eaton Cutler-Hammer D100ED40 40 I/O Expander with 24 Inputs and 16 Outputs.

Urgent Automation is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply.

Product comes with Urgent Automation's 1-year warranty.


Description: Eaton Cutler-Hammer D100ED40 40 I/O Expander with 24 Inputs and 16 Outputs.


Rated 4.7 with 11 reviews







About D100ED40

The D100ED40 is an expansion rack from Allen Bradley, designed for the cutler hammer series. This a 40-pin expansion I/O rack is used along with a D100 series PLC (Programmable Logic Controller). The D100ED40 expansion extends the functionality of and offers additional I/O ports for a large number of PLC applications when connected with the cable built in the expansion unit. The D100ED40 has an input power supply requirement of around 115 Volts AC, while the DC input voltage is around 24 Volts. The D100ED40, when used with a combination of other accessories, provides the user with 24 input ports and 16 output ports. These ports are driven by a transistor. While installing the D100ED40 along with the D100 system, it should be noted that the ideal temperature range is between 0 and 60 degree Celsius and that the ambient humidity is less than 95% without rapid temperature changes. The D100 series of controllers are resistant to electrical noise and can sustain vibrations of less than 0.5 millimeters. It is highly recommended that the D100ED40 expansion rack is mounted along with the controller in a protective enclosure, which should be able to sustain industrial environments.

The dimensions of the D100ED40 are 12.6 inches (320 millimeters) in length, 4 inches (100 millimeters) in height and 4.4 inches (112 millimeters) in width. The D100ED40 is to be mounted on 4 screws, in mounting holes with a diameter of 5 millimeters. The mounting screws to be used are “M4”. The D100ED40 has a rated voltage of 24 Volts DC internal for dry contact or external voltage of 855 to 132 Volts AC for 115 Volts AC contact. The input current is 10 mA for both AC and dry contacts. The ON delay is 5 milliseconds while the OFF delay is 15 milliseconds, for both dry and AC contacts, whereas the ON level is CLOSE for Dry contacts and 75 Volts minimum for AC contacts, and the OFF level is Open for dry contact and 25 Vols maximum for AC contact.


Technical specifications:


ManufacturerEaton Cutler-Hammer
BrandEaton Cutler-Hammer
Part Number/Catalog No.D100ED40
Product Type40 I/O Expander
Power Supply115V AC
Inputs24
Input Type24V DC
Outputs16
Output TypeTransist.
ManufacturerEaton Cutler-Hammer
BrandEaton Cutler-Hammer
Part Number/Catalog No.D100ED40
Product Type40 I/O Expander
Power Supply115V AC
Inputs24
Input Type24V DC
Outputs16
Output TypeTransist.
Common misspellings:
  • Dl00ED40
  • D1o0ED40
  • D10oED40
  • D100EDA0
  • D100ED4o