D100ENC8

Urgent Automation is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply.

Product comes with Urgent Automation's 1-year warranty.

Rated 4.5 with 9 reviews

Rockwell Disclaimer: The product is used surplus. Urgent Automation is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Urgent Automation is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, Urgent Automation makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Urgent Automation also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Urgent Automation also makes no representations as to your right to install any such firmware on the product. Urgent Automation will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


D100ENC8

Description: Eaton Cutler-Hammer D100ENC8 8 I/O Expander with 8 Inputs and 0 Outputs.

Urgent Automation is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply.

Product comes with Urgent Automation's 1-year warranty.


Description: Eaton Cutler-Hammer D100ENC8 8 I/O Expander with 8 Inputs and 0 Outputs.


Rated 4.5 with 9 reviews







About D100ENC8

The DC100ENC8 is a genuine (8) 115 Volt AC Input piece of equipment created by Eaton Cutler Hammer to perform a myriad of functions for small programmable controllers. This device, which belongs to the expandable unit series, is comprised of numerous building blocks. The D100ENC8, like other D100 microcontrollers, comes with many unique features. One of the aspects of this Programmable logic controller is that for the system to be complete, the controller should be connected to a power line while the inputs and outputs are connected to the correct terminals, so that finally a program may be entered through a pre-programmed PROM or a hand-held programmer. There are different sizes and types of controllers available for this product, such as 14 I/O Controller with 8 inputs and 6 outputs; this type of controller has an expandable I/O capacity, a built-in high-speed counter, and an integral computer interface, as well as a PROM writer feature This module can also be paired with a 20 I/O Controller, which is available with an expandable input/output capacity of up to 40 I/O and powerful analog capabilities, and has 12 inputs and eight outputs. Another option is a 40 I/O Controller; this type has a built-in PROM Writer, a high-speed counter, an expandable 80 I/O capacity, and 24 inputs in addition to 16 inputs. Finally, the DC100ENC8 can be paired with a 40 I/O High-speed Controller; featuring 24 inputs and sixteen outputs, this type of controller has an expandable input/output capacity of up to 120 I/O.

The DC100ENC8 can also be used with an expansion unit. These are usually connected to the controller by a cable to provide extra inputs and outputs.  Each controller can be furnished with up to 2 expanders, as long as the aggregate value of inputs and outputs combined doesn’t exceed the maximum value listed for the used controller. The D100 controller can be programmed with the D100PG10A programmer, which plugs into the device and derives its power from it. The D100NCG also contains 2 analog channels (these are used by 14I/O and 20A in addition to 40A0 each consisting 12 set points. This option helps regulate temp and can be used for other control applications. Other physical attributes of the D100ENC8 include a protocol module (which permits single connections), essential accessories (such as the timer or counter access module, and programming keys, functions keys

Programmable controllers cover an extensive range of equipment and capabilities, which include relay switching with minimum I/O to huge supervisory controllers that perform numerous control and data acquisition functions. As a powerful micro-programmable controller, the D100ENC8 has an outstanding hand-held programmer that features an LCD display. In addition, it is compatible with many personal computers. Other features of this product include 120 I/O, timers, flip-flop, master control, and step sequence, and RAM, PROM or PC disk storage. The D100ENC8 allows access to an array of timers and counters. What’s more, it allows users to set high and low limits. Other great installation aspects include maximum password protection and a clear display. With this model, users have access to a keyboard that has been enabled by a logic circuit as well as an error code display unit. The DC100ENC controller is not generally affected by electrical noise, making it convenient for use in industrial places. It should be mounted in a protected enclosure or panel. When expanders are utilized, the unit’s spacing is determined by the length/size of the connecting cables.


Technical specifications:


ManufacturerEaton Cutler-Hammer
BrandEaton Cutler-Hammer
Part Number/Catalog No.D100ENC8
Product Type8 I/O Expander
Power Supply115V AC
Inputs8
Input Type24V DC
Outputs0
Output TypeN/A
ManufacturerEaton Cutler-Hammer
BrandEaton Cutler-Hammer
Part Number/Catalog No.D100ENC8
Product Type8 I/O Expander
Power Supply115V AC
Inputs8
Input Type24V DC
Outputs0
Output TypeN/A
Common misspellings:
  • Dl00ENC8
  • D1o0ENC8
  • D10oENC8
  • D100ENCb