Rockwell Disclaimer: The product is used surplus. Urgent Automation is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Urgent Automation is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, Urgent Automation makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Urgent Automation also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Urgent Automation also makes no representations as to your right to install any such firmware on the product. Urgent Automation will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
The Eaton Cutler-Hammer 7685ST-10E PanelMate ePro PS Classic operator interface has a 10-inch touchscreen display compatible with gloved hand operations and which has a stainless-steel bezel. In particular, it has a display that measures 10.4 inches with 16 million color graphics and an SVGA resolution of 800 x 600. An auto-dimming feature is also present on this interface and it has a replaceable backlight with a typical lifespan of about 50,000 hours, as well as a brightness rating of 420 Nits. Its enclosure ratings are the NEMA Type 4, 4X, 12 and IP65 ratings.
This interface has a nominal voltage of 24V DC and a current of 1.4 A. The power consumption is 33 W or 113 BTU/hour, while its peak inrush current is 7 A. The 7685ST-10E operating temperature range is 0-60 oC and its non-operating temperature range is -25-70 oC. It also has a system vibration of 1 g peak at 5-500 Hz and system shock of 100 g for both operation or in storage or when the power is off. The non-condensing relative humidity of this drive is 20-95% for operating and for non-operating, while its maximum altitudes are 10,000 feet when operating and 40,000 feet when not operating.
A 1 GB courtesy internal CompactFlash memory is installed on the 7685ST-10E interface, as well as a 512 MB DDR2 RAM. Note that the available storage has C and D partitions and the Protect Mode feature of this interface is always active and works with the C: partition. The interface’s memory is expandable and you can do so using the included external CompactFlash slot and the PCMCIA and USB ports.