2711-B6C2

Urgent Automation is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply.

Product comes with Urgent Automation's 1-year warranty.

Rated 5 with 15 reviews

Rockwell Disclaimer: The product is used surplus. Urgent Automation is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Urgent Automation is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, Urgent Automation makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Urgent Automation also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Urgent Automation also makes no representations as to your right to install any such firmware on the product. Urgent Automation will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


2711-B6C2

Description: The 2711-B6C2 belongs to the Allen-Bradley PanelView Standard Operator Terminals. This terminal has 5 inch display with DH485 communication port.

Urgent Automation is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply.

Product comes with Urgent Automation's 1-year warranty.


Description: The 2711-B6C2 belongs to the Allen-Bradley PanelView Standard Operator Terminals. This terminal has 5 inch display with DH485 communication port.


Rated 5 with 15 reviews







About 2711-B6C2

The 2711-B6C2 is a single port PanelView 600 operator terminal. This product is a legacy hardware under the product category PanelView Standard Operator Terminals. The 2711-B6C2 offers a single communication port supporting DH485 protocol. DH485 is a industry approved protocol that can be used in peer to peer or multiple partner communication. By default, the works as DH5 over RS232. To connect the terminal in multi-partner configuration, use a 1747-UIC converter. This enables connection to a DH485 network implementation in daisy-chain topology similar to RS485. The colored TFT screen supports colored animations following industry standard and approved color nomenclature. Standard colors such as Green for normal, Yellow for warning and Red for alarm or abnormality may be implemented using this terminal. The screen has a backlight that is halogen lit with a lifespan of 50,000 hr 1/2 life at 25 °C (77 °F). Equipped with a Touchscreen and Keypad, operator can input control commands and system responses using the Two input interfaces. Both interface is capable of up to 1 million actuations each. The terminal is configured using PanelBuilder32 software. IT is powered by an AC source with a rated supply of 85 to 264 Volts of AC with power consumption of 60VA max. It has a built-in RAM of 170 KB application runtime and 240 KB non-volatile memory. Expansion memory is not supported by this terminal. The terminal dimension is 192 x 290 x 116 mm 7.55 x 11.40 x 4.57 in and an approximate weight of 2.0 kg (4.4 lb).

Technical specifications:


Manufacturer: Rockwell Automation
Brand: Allen-Bradley
Part Number: 2711-B6C2
Product Family: PanelView Standard Terminals
Product TypeOperator Terminals
Operator Input: Keypad / Touch
Display Type: Color active matrix TFT
Display Area: 115 x 86 mm (4.54 x 3.4 in.).
Resolution:320 x 234
Application memory: 170 KB application runtime; 240 KB nonvolatile memory (application objects plus text and bitmaps)
Touchscreen:Touch cells: 128 Actuation: 1 million presses
Communication ports:DH485
Manufacturer: Rockwell Automation
Brand: Allen-Bradley
Part Number: 2711-B6C2
Product Family: PanelView Standard Terminals
Product TypeOperator Terminals
Operator Input: Keypad / Touch
Display Type: Color active matrix TFT
Display Area: 115 x 86 mm (4.54 x 3.4 in.).
Resolution:320 x 234
Application memory: 170 KB application runtime; 240 KB nonvolatile memory (application objects plus text and bitmaps)
Touchscreen:Touch cells: 128 Actuation: 1 million presses
Communication ports:DH485
Common misspellings:
  • 27l1-B6C2
  • 271l-B6C2
  • 2711-86C2