---

About 2711-K6C3L1

The 2711-K6C3L1 is part of the discontinued PanelView Standard Operator Terminals. The 2711-K6C3L1 is under the product category of PanelView 600. The operator terminal bridges the interaction between operators and machines and enables complete individual automation of factory level processes. The colored HMI display screen has a diagonal size of 5 inches (12.5 centimeters). The terminal is compatible with PanelBuiler32 software, used in developing custom applications or process mimic display. The 2711-K6C3L1’s has a keypad assembly that serves as the operator input area. The electronic circuitry is powered by a rated supply of 18 and 32 Volts DC. The internal storage capacity of the terminal is 240 KB and has a replaceable backlight with a designed runtime of up to 50,000 hr 1/2 life at 25 °C (77 °F). The terminal weighs 6 pounds (2.7 kilograms) and has a dimension of 14 inches (35 centimeters) by 11 inches (27.5 centimeters) by 8 inches (20 centimeters). The HMI hardware is capable in communicating with SLC 500 or MicroLogix, CompactLogix and ControLogix using communication adapters and gateways. The pre-installed DH-485 communication ports enables this communication feature between interface devices and controllers. communication between the processors. Application download can be made using the PanelBuilder32 software. This same software is also used to create and design HMI application for use by the terminal. Alternatively, a memory card may be used to load applications or a stand-alone software called WinPFT may also be used to transfer or copy applications from and to the terminal. The terminal complies with IEC-1131-2 pollution protection is recommended for mounting in a NEMA Type 12, 13, 4X (indoor use only), IP54 or IP65 rated enclosure. When wiring the terminal, follow publication NFPA 70E, Electrical Safety Requirements for Employee Workplaces. Additionally, a general rule shall be observe when installing the terminal such as connecting the power to own branch circuit, input power is protected by thermal protection devices such as fuse or circuit breaker of not more than 15 amperes and a separate run of communication wiring and power wiring.

Technical specifications: