2711-K9C3

Urgent Automation is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply.

Product comes with Urgent Automation's 1-year warranty.

Rated 5 with 12 reviews

Rockwell Disclaimer: The product is used surplus. Urgent Automation is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Urgent Automation is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, Urgent Automation makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Urgent Automation also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Urgent Automation also makes no representations as to your right to install any such firmware on the product. Urgent Automation will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


2711-K9C3

Description: The 2711-K9C3 is a Human Machine Interface (HMI) from Allen-Bradley PanelView Standard Operator Terminals. This terminal has 9-inch Colored screen, Keypad operator interface, DH485 and RS232 printer port.

Urgent Automation is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply.

Product comes with Urgent Automation's 1-year warranty.


Description: The 2711-K9C3 is a Human Machine Interface (HMI) from Allen-Bradley PanelView Standard Operator Terminals. This terminal has 9-inch Colored screen, Keypad operator interface, DH485 and RS232 printer port.


Rated 5 with 12 reviews







About 2711-K9C3

The 2711-K9C3 is an AC powered electronic device designed by Allen-Bradley for implementation of Human Machine Interface (HMI) solution in the machine level area. Exchange data and information and visualize the process across the plant floor level with the use of this HMI hardware. It has a 9-inch Active Matrix Thin-Film Resistor (TFT) with Cold Cathode Fluorescent (CCF) Backlight that serves as the visualization area where process graphic is displayed. The operator input area is the keypad assembly composed of 16 function keys, numeric display and navigation buttons which serves as the operator input area. The keypad can be actuated up to 1 million presses. The DH485 protocol serves as the data highway for the simultaneous data exchange between the operator and the machine or process. It allows highspeed information exchange over long distance which make it useful to implement consolidated control point of multiple instruments. Use PanelBuilder32 software to create 2711-K9C3 terminal application. This software is an obsolete software directly replaced by 2711-ND3A. Use only AC power to energize the electronic circuitry of the device. Specifically, a rated supply range of 85…264V AC, 47…63 Hz is acceptable. The terminal’s heat dissipation is 39 Watts (133 BTU/HR). Use recommended enclosures with ratings NEMA Type 12/13, 4X (Indoor use only) IP54, IP65 for this device. Ensure that vibration does not exceed 1G up to 2,000 Hz. Maintain operating temperature of 0 to 55° C (32 to 131° F) and relative humidity of 5 to 95% at 0 to 55° C (32 to 131° F).

Technical specifications:


Manufacturer: Rockwell Automation
Brand: Allen-Bradley
Part Number: 2711-K9C3
Product Family: PanelView Standard Terminals
Product TypeOperator Terminals
Operator Input: Keypad
Display Type: Color active matrix TFT
Resolution:640 x 400
Display Area: 171 x 130 mm (6.73 x 5.12 in.)
Application memory: 310 KB application runtime; 1008 KB nonvolatile memory
Keypad Actuation:Actuation: 2 million presses
DH485; RS232 (Printer)Input Voltage range:
Manufacturer: Rockwell Automation
Brand: Allen-Bradley
Part Number: 2711-K9C3
Product Family: PanelView Standard Terminals
Product TypeOperator Terminals
Operator Input: Keypad
Display Type: Color active matrix TFT
Resolution:640 x 400
Display Area: 171 x 130 mm (6.73 x 5.12 in.)
Application memory: 310 KB application runtime; 1008 KB nonvolatile memory
Keypad Actuation:Actuation: 2 million presses
DH485; RS232 (Printer)Input Voltage range:
Common misspellings:
  • 27l1-K9C3
  • 271l-K9C3