Eaton Cutler-Hammer
Eaton Cutler-Hammer Drives
Eaton Cutler-Hammer PLC
Eaton Cutler-Hammer Circuit Breakers
Allen Bradley Panelview
Allen Bradley PLC
GE Fanuc
Urgent Automation is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply.
Product comes with Urgent Automation's 1-year warranty.
Rockwell Disclaimer: The product is used surplus. Urgent Automation is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Urgent Automation is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, Urgent Automation makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Urgent Automation also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Urgent Automation also makes no representations as to your right to install any such firmware on the product. Urgent Automation will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Urgent Automation is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply.
Product comes with Urgent Automation's 1-year warranty.
The Eaton S811V36N3S Open Soft Starter operates with 36 Amps, a 200-600V Operating Voltage, and a 47-63 Hz Operating Frequency. It has a 290 mm Frame Size and Standard Features.
The Eaton Cutler-Hammer S811V36N3S soft starter is a solid-state reduced voltage soft starter. It is a 3-phase controller with a control voltage of 24 Volts DC and a supply voltage rating of 200 to 600 Volts AC. Applications that make use of this Eaton S811 series soft starter include fan, chiller, pump, conveyor, mixer, and lift applications. This device implements Intelligent Technology and it can bypass SCR power after the motor reaches its nominal speed to reduce the permanent losses. The S811V36N3S soft starter has several digital inputs that have the following typical configuration: Input 1 – Start, Input 2 – Jog, Input 3 – Hand/Auto (control source), and Input 4 – Fault Reset. It also has 2 digital outputs to signal the by-pass activation and fault conditions.
The most commonly used mode for soft starting (voltage ramp) is also implemented in the S811V36N3S soft starter. This mode starts by applying voltage to the motor that is defined by the Initial Torque parameter. This start voltage is then gradually increased to follow the Soft Start Time parameter. When the unit detects that the full motor speed has been reached, it activates the bypass contactor. The kick start option can be activated for loads that need more power to start moving. The S811V36N3S soft starter has a frequency rating of 50 to 60 Hertz and a current rating of 360 Amps. It is equipped with many programmable protection mechanisms like electronic motor overload detection, phase reversal protection, and overheating detection over thermal memory. This controller’s operating temperature range is -30 to 50 degrees Celsius, and its non-condensing acceptable relative humidity range is 5 to 95%.
| Manufacturer | Eaton Cutler-Hammer |
| Brand | Eaton Cutler-Hammer |
| Part Number | S811V36N3S |
| Product Type | Open Soft Starter |
| Frame Size | 290 mm |
| Amps | 36 |
| Option | No |
| Features | Standard |
| 230V AC Hp Rating | 150 |
| Max. Current Capacity | 360 |
| Insulating Voltage (Ui) | 660V AC |
| Operating Voltage | 200-600V AC |
| Operating Frequency | 47-63 Hz |
| Resistance to Shock | 15G |
| Bypass Mechanical Lifespan | 10M |
| Manufacturer | Eaton Cutler-Hammer |
| Brand | Eaton Cutler-Hammer |
| Part Number | S811V36N3S |
| Product Type | Open Soft Starter |
| Frame Size | 290 mm |
| Amps | 36 |
| Option | No |
| Features | Standard |
| 230V AC Hp Rating | 150 |
| Max. Current Capacity | 360 |
| Insulating Voltage (Ui) | 660V AC |
| Operating Voltage | 200-600V AC |
| Operating Frequency | 47-63 Hz |
| Resistance to Shock | 15G |
| Bypass Mechanical Lifespan | 10M |