Eaton Cutler-Hammer
Eaton Cutler-Hammer Drives
Eaton Cutler-Hammer PLC
Eaton Cutler-Hammer Circuit Breakers
Allen Bradley Panelview
Allen Bradley PLC
GE Fanuc
Urgent Automation is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply.
Product comes with Urgent Automation's 1-year warranty.
Rockwell Disclaimer: The product is used surplus. Urgent Automation is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Urgent Automation is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, Urgent Automation makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Urgent Automation also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Urgent Automation also makes no representations as to your right to install any such firmware on the product. Urgent Automation will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Urgent Automation is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply.
Product comes with Urgent Automation's 1-year warranty.
The FD1025 is a molded case circuit breaker designed by Eaton. This FD type circuit protection device features fixed thermal and fixed magnetic trip units and a single pole. Also, the FD1025 includes load side terminals and an F type of frame. The FD1025 represents a complete breaker with a voltage rating of 347 Volts AC and 125 Volts DC. This circuit breaker also features a continuous current rating at 40 degrees Celsius of 15 to 150 Amps and an interrupting rating of 35 kAIC at 277 Volts AC and 18 kAIC at 347 Volts AC. Besides that, the FD1025 model of a circuit breaker has a frequency rating of 50/60 Hertz and an exact current rating of 25 Amps. The FD1025 circuit breaker is a highly efficient and reliable device which will minimize the usage of energy, reduce costs, and have a positive impact on the environment. This device also offers many safety features that will help in identifying and preventing electrical hazards that may occur.
The Series C circuit breakers are intended for the domestic market and they have fewer options than Series G circuit breakers, but they offer a variety of features which are more than enough to fulfill the requirements of complex industrial systems. Generally, these devices are used to prevent current overloads and circuit breaks which could lead to equipment failure and risks to people operating the system. All circuit breakers from Series C are UL listed and the breakers with frame F are also HACR rated and they can be used for reverse feed purposes. The FD1025 circuit breaker is a small device so it could be fitted into confined places and installed in systems where there is not much space for components. The dimensions of this circuit breaker include a length of 858 millimeters (3.38 inches), a height of 350 millimeters (1.38 inches), and a width of 350 millimeters (1.38 inches). This circuit breaker is also very light, with a weight of only 0.90 kilograms or 2 pounds.
| Part Number/Catalog No. | FD1025 |
| Product Type | Molded Case Circuit Breaker |
| Series | C |
| Frame | F |
| Pole(s) | 1 |
| Trip Amps | 35 kA @ 277V |
| Interrupting Capacity | 2 lb |
| Weight | Thermal-Magnetic |
| Trip Unit | 1.38 x 6 x 3.38 in. |
| Part Number/Catalog No. | FD1025 |
| Product Type | Molded Case Circuit Breaker |
| Series | C |
| Frame | F |
| Pole(s) | 1 |
| Trip Amps | 35 kA @ 277V |
| Interrupting Capacity | 2 lb |
| Weight | Thermal-Magnetic |
| Trip Unit | 1.38 x 6 x 3.38 in. |