Eaton Cutler-Hammer
Eaton Cutler-Hammer Drives
Eaton Cutler-Hammer PLC
Eaton Cutler-Hammer Circuit Breakers
Allen Bradley Panelview
Allen Bradley PLC
GE Fanuc
Urgent Automation is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply.
Product comes with Urgent Automation's 1-year warranty.
Rockwell Disclaimer: The product is used surplus. Urgent Automation is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Urgent Automation is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, Urgent Automation makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Urgent Automation also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Urgent Automation also makes no representations as to your right to install any such firmware on the product. Urgent Automation will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Urgent Automation is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply.
Product comes with Urgent Automation's 1-year warranty.
The Cutler-Hammer Eaton FDC2100 is a Series C Molded Case Circuit Breaker. This circuit breaker has a 100 Amps trip rating and it combines thermal and magnetic protection mechanisms to provide a fast trip response. It has fixed thermal and fixed magnetic trip reactions to overcurrents and short-cuts. This is a 2-pole circuit breaker with dimensions of 2.75 inches x 6.00 inches x 3.38 inches (69.9 millimeters x 152.4 millimeters x 85.7 millimeters). The FDC2100 includes terminals on the load side only. This F Frame complete circuit breaker can be used to protect circuitry with a 600 Volts AC voltage rating or with a 250 Volts DC voltage rating.
Users can operate the FDC2100 circuit breaker over the circuit breaker handle. Users can also test the operation of the device with the “push-to-trip” button. If users take a close look at the handle, they will see that it has 3 positions. Two positions are marked with raised lettering to indicate the “on” and “off” positions. When the handle is situated between these 2 positions, it means that the device is in the “trip” position. There is also a color-coded strip for each circuit breaker state: red for the “off” state, green for the “on” state, and white for the tripped position. The interrupting capacity of the FDC2100 is 100 kAIC at 480 Volts AC. Although the nominal current rating of the module is 100 Amps, users must note that the operating characteristics of the circuit breaker can vary depending on the ambient temperature. The 100 Amps value is calibrated at 40 degrees Celsius (104 degrees Fahrenheit).
| Part Number/Catalog No. | FDC2100 |
| Product Type | Molded Case Circuit Breaker |
| Series | C |
| Frame | F |
| Pole(s) | 2 |
| Trip Amps | 200 kA at 240 Volts |
| Interrupting Capacity | 3 pounds |
| Weight | Thermal-Magnetic |
| Trip Unit | 2.75 x 6 x 3.38 inches |
| Part Number/Catalog No. | FDC2100 |
| Product Type | Molded Case Circuit Breaker |
| Series | C |
| Frame | F |
| Pole(s) | 2 |
| Trip Amps | 200 kA at 240 Volts |
| Interrupting Capacity | 3 pounds |
| Weight | Thermal-Magnetic |
| Trip Unit | 2.75 x 6 x 3.38 inches |