Eaton Cutler-Hammer
Eaton Cutler-Hammer Drives
Eaton Cutler-Hammer PLC
Eaton Cutler-Hammer Circuit Breakers
Allen Bradley Panelview
Allen Bradley PLC
GE Fanuc
Urgent Automation is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply.
Product comes with Urgent Automation's 1-year warranty.
Rockwell Disclaimer: The product is used surplus. Urgent Automation is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Urgent Automation is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, Urgent Automation makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Urgent Automation also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Urgent Automation also makes no representations as to your right to install any such firmware on the product. Urgent Automation will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Urgent Automation is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply.
Product comes with Urgent Automation's 1-year warranty.
The GD3035 from Eaton is a complete 35 Amp rated Series C circuit breaker. The AC voltage rating for the GD3035 is 480 Volts AC (at 50 to 60 Hertz) while the DC voltage rating is 125 to 250 Volts DC. The interrupt specifications for the GD3035 are 65 kAIC at 240 Volts AC, 14 kAIC at 480 Volts AC, and 10 kAIC at 250 Volts DC. The GD3035 is a 3-pole device with a non-interchangeable trip module. The trip module is of the fixed magnetic and the fixed thermal type. The GD3035 is provided by the manufacturer in a G frame. The weight of the GD3035 is 2.05 pounds. The dimensions of the GD3035 are 6.5 x 3.7 x 3.7 inches. A shunt trip, padlockable handle, and alarm switch are some of the accessories available for the GD3035. These accessories should be factory installed according to the UL standards.
Field installation of accessories can be done in areas where local codes permit the practice. The GD3035 has aluminum terminals and #10 – 1/0 AWG copper or aluminum wire is recommended for terminations. With aluminum wires, a suitable joint compound should be used to prevent terminal overheating. To minimize the possibility of injury or equipment damage, several safety precautions are recommended by the manufacturer regarding the maintenance or installation of the GD3035. In addition to general safety precautions and local regulations, the manufacturer recommends that maintenance and installation be carried out by trained personnel and that the breaker and all the connected electrical equipment should be powered off. Furthermore, care should be taken to ensure that voltages are absent from the working area.
| Part Number/Catalog No. | GD3035 |
| Product Type | Molded Case Circuit Breaker |
| Series | C |
| Frame | G |
| Trip Unit | Thermal-Magnetic |
| Pole(s) | 3 |
| Trip Amps | 35 Amps |
| Dimensions | 4.88 x 3 x 2.63 inches |
| Part Number/Catalog No. | GD3035 |
| Product Type | Molded Case Circuit Breaker |
| Series | C |
| Frame | G |
| Trip Unit | Thermal-Magnetic |
| Pole(s) | 3 |
| Trip Amps | 35 Amps |
| Dimensions | 4.88 x 3 x 2.63 inches |