Eaton Cutler-Hammer
Eaton Cutler-Hammer Drives
Eaton Cutler-Hammer PLC
Eaton Cutler-Hammer Circuit Breakers
Allen Bradley Panelview
Allen Bradley PLC
GE Fanuc
Urgent Automation is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply.
Product comes with Urgent Automation's 1-year warranty.
Rockwell Disclaimer: The product is used surplus. Urgent Automation is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Urgent Automation is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, Urgent Automation makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Urgent Automation also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Urgent Automation also makes no representations as to your right to install any such firmware on the product. Urgent Automation will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Urgent Automation is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply.
Product comes with Urgent Automation's 1-year warranty.
The Eaton Cutler-Hammer KDB3225 Molded Case Circuit Breaker is an assembled circuit breaker in the Frame K, series of thermal-magnetic circuit breakers with non-interchangeable trip units, used for providing overload and short-circuits protection to connected conductors and devices. It consists of a frame made of insulated enclosure, housing, a thermal and magnetic trip unit, and line and load side terminals. The KDB3225 is a 3-pole designed breaker with 225 Amps nominal current rating, and with a standard interrupting rating of 35 KAIC. It is designed for applications with the maximum line voltage of 600 Volt AC, and it is suitable for reverse feed use.
The KDB3225 is supplied with TA300K standard line and load end terminal, with terminal covers, and during field wiring, a terminal is attached to each pole. Its trip unit is designed to be closed to adjustment, and it is made of a bimetal strip and electromagnetic in series with line current. It provides trip action using the bimetal thermal strip, which it deflects as it is heated by a prolonging current overload, and an electromagnetic in series with line load, which will cause an instantaneous trip action when the current exceeds the designated value. The KDB3225 is designed for use at a temperature below 40 degrees Celsius, and for use at higher operating value, it must be recalibrated for higher ambient temperature. It is designed for optimum use at a relative humidity range of 0 to 95%, and it can still retain complete function at a maximum altitude of 6000 feet. The KDB3225 is designed to meet standards like AS, IEC, BS, and UL, and it has an approximate shipping weight of 5.5 kilograms.
| Part Number/Catalog No. | KDB3225 |
| Product Type | Molded Case Circuit Breaker |
| Series | C |
| Frame | K |
| Poles | 3 |
| Amps | 225 |
| Unit Type | Thermal-Magnetic |
| Interrupting Capacity | 65 kA @ 240V AC |
| Dimensions (W x H x D) | 5.5 x 10.13 x 4.1 in. |
| Weight | 11.5 lbs |
| Part Number/Catalog No. | KDB3225 |
| Product Type | Molded Case Circuit Breaker |
| Series | C |
| Frame | K |
| Poles | 3 |
| Amps | 225 |
| Unit Type | Thermal-Magnetic |
| Interrupting Capacity | 65 kA @ 240V AC |
| Dimensions (W x H x D) | 5.5 x 10.13 x 4.1 in. |
| Weight | 11.5 lbs |