Eaton Cutler-Hammer
Eaton Cutler-Hammer Drives
Eaton Cutler-Hammer PLC
Eaton Cutler-Hammer Circuit Breakers
Allen Bradley Panelview
Allen Bradley PLC
GE Fanuc
Urgent Automation is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply.
Product comes with Urgent Automation's 1-year warranty.
Rockwell Disclaimer: The product is used surplus. Urgent Automation is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Urgent Automation is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, Urgent Automation makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Urgent Automation also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Urgent Automation also makes no representations as to your right to install any such firmware on the product. Urgent Automation will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Urgent Automation is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply.
Product comes with Urgent Automation's 1-year warranty.
The 3-pole Eaton CHND3800T56W is an 800 Amps, 600 Volts AC rated CHND type of circuit breaker. It is a complete breaker with an electronic trip unit. The interrupting capacity ratings for the breaker are 65 kAIC at 480 Volts AC and 100 kAIC at 240 Volts AC. The weight of the CHND3800T56W is 19.9 kilograms and the dimensions of the breaker enclosure are 215.9 x 215.9 x 139.7 millimeters. The OPTIM 550 LSIG trip is part of the CHND3800T56W. The OPTIM 550 is programmable and it supports RMS sensing. The current range that is supported runs from 70 to 1200 Amps and the interrupting range is 30 to 100 kA. The rating plug is interchangeable and the module supports an over-temperature trip. The device features include a digital display, trip information, LEDs that indicate the cause of trips, and monitoring for the current. The IMPACC field communications features are field upgradable. The testing methods available are the OTP, BIM, and IMPACC.
The 100% rated, NG frame CHND3800T56W does not have terminals. Terminals can be purchased from the manufacturer. The internal accessories that are available include the shunt trip, alarm switch, and under-voltage release mechanism. The CHND3800T56W does not need ventilation. It can be operated at 100% of the frame rating in an enclosure with the following dimensions: 42 inches in height, 22.75 inches in width, and 11.5 inches in depth. The high voltage in energized equipment can cause damage, injury, and death. Therefore, prior to mounting the breaker in a system, ensure that the working area is clear of voltages and that all the electrical equipment nearby is powered off. Special care is required for reverse feed applications.
| Part Number/Catalog No. | CHND3800T56W |
| Product Type | Molded Case Circuit Breaker |
| Series | C |
| Frame | N |
| Poles | 3 |
| Amps | 800 Amps |
| Trip Model | Model 550 |
| Trip Type | LSIG |
| Interrupting Capacity | 100 kAIC at 240 Volts AC |
| Dimensions (W x H x D) | 8.25 x 16 x 5.5 inches |
| Weight | 45 pounds |
| Part Number/Catalog No. | CHND3800T56W |
| Product Type | Molded Case Circuit Breaker |
| Series | C |
| Frame | N |
| Poles | 3 |
| Amps | 800 Amps |
| Trip Model | Model 550 |
| Trip Type | LSIG |
| Interrupting Capacity | 100 kAIC at 240 Volts AC |
| Dimensions (W x H x D) | 8.25 x 16 x 5.5 inches |
| Weight | 45 pounds |