Eaton Cutler-Hammer
Eaton Cutler-Hammer Drives
Eaton Cutler-Hammer PLC
Eaton Cutler-Hammer Circuit Breakers
Allen Bradley Panelview
Allen Bradley PLC
GE Fanuc
Urgent Automation is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply.
Product comes with Urgent Automation's 1-year warranty.
Rockwell Disclaimer: The product is used surplus. Urgent Automation is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Urgent Automation is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, Urgent Automation makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Urgent Automation also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Urgent Automation also makes no representations as to your right to install any such firmware on the product. Urgent Automation will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Urgent Automation is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply.
Product comes with Urgent Automation's 1-year warranty.
The Eaton RGH316033E is a Series G electronic circuit breaker. The RGH316033E is a complete circuit breaker rated at 1600 Amps. It is rated for 125 kiloamps interrupt capacity at 240 Volts AC, 65 kiloamps interrupt capacity at 480 Volts AC, and for 50 kiloamps interrupt capacity at 600 Volts AC. The RGH316033E has three poles, it is rated for 50 and 60 Hertz frequency and it uses a Digitrip 310+ electronic LS trip unit. The insulation voltage rating for the conducting paths is 750 Volts AC and for the auxiliary circuits, it is 690 Volts AC. The impulses withstand voltage rating for the conducting paths is 8 kilovolts. The imperial tapped load and line terminals are included with the circuit breaker. A major advantage of the RGH316033E is that trip settings can be made through the electronic trip unit and therefore DIP switches are not required.
Other features of the circuit breaker include UL ratings, an undervoltage release, a shunt trip, interlocks, a bell alarm, an auxiliary switch, draw out cassettes, and a handle mechanism. Features of the trip unit include an adjustable long-time/short-time delay, a status indicator, a trip push button, and a test port which can be used to interface with a test kit, an ammeter, and an LED module for the cause of the trip. The installation and maintenance of the RGH316033E should only be performed by trained and qualified personnel. Power to the circuit breaker should be disconnected before any maintenance activity is performed. Dimensions of the R-frame RGH316033E are 15.5 x 15.5 x 9.75 inches. The weight of the circuit breaker is 102 pounds.
| Part Number/Catalog No. | RGH316033E |
| Product Type | Molded Case Circuit Breaker |
| kAIC @ 480VAC | 65 |
| Amps | 1600 |
| Poles | 3 |
| Trip Unit | 310+ Electronic LS |
| Terminations | Imperial Tapped Line/Load Conductor |
| Max. Rated Current | 2500 A |
| Main Conducting Paths | 8 kV |
| Endurance | 3,000 Operating Cycles |
| Max. Switching Frequency | 60 1/h |
| Rated Making Capacity | 20 A |
| Rated Operational Voltage | 125/250 V |
| Power Consumption @ 24 Vac | 612 VA |
| Max. Opening Time | 62 ms |
| Part Number/Catalog No. | RGH316033E |
| Product Type | Molded Case Circuit Breaker |
| kAIC @ 480VAC | 65 |
| Amps | 1600 |
| Poles | 3 |
| Trip Unit | 310+ Electronic LS |
| Terminations | Imperial Tapped Line/Load Conductor |
| Max. Rated Current | 2500 A |
| Main Conducting Paths | 8 kV |
| Endurance | 3,000 Operating Cycles |
| Max. Switching Frequency | 60 1/h |
| Rated Making Capacity | 20 A |
| Rated Operational Voltage | 125/250 V |
| Power Consumption @ 24 Vac | 612 VA |
| Max. Opening Time | 62 ms |