Eaton Cutler-Hammer
Eaton Cutler-Hammer Drives
Eaton Cutler-Hammer PLC
Eaton Cutler-Hammer Circuit Breakers
Allen Bradley Panelview
Allen Bradley PLC
GE Fanuc
Urgent Automation is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply.
Product comes with Urgent Automation's 1-year warranty.
Rockwell Disclaimer: The product is used surplus. Urgent Automation is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Urgent Automation is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, Urgent Automation makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Urgent Automation also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Urgent Automation also makes no representations as to your right to install any such firmware on the product. Urgent Automation will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Urgent Automation is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply.
Product comes with Urgent Automation's 1-year warranty.
The SVX020A2-5A4N1 is an adjustable frequency drive manufactured by Eaton Cutler-Hammer. The Cutler-Hammer SVX020A2-5A4N1 Adjustable Frequency Drive belongs to the SVX9000 Series of adjustable frequency drives. The Cutler-Hammer SVX020A2-5A4N1 Adjustable Frequency Drive features ratings of 20 Horsepower, 575 Volts AC voltage, 3 phases, 22.0 Amps, 8 inputs, and 4 outputs. The Cutler-Hammer SVX020A2-5A4N1 Adjustable Frequency Drive is contained in the FR6 Frame. The Cutler-Hammer SVX020A2-5A4N1 Adjustable Frequency Drive features a parameter copy function design for copying 1 parameter group or all the parameter groups from the Cutler-Hammer SVX020A2-5A4N1 Adjustable Frequency Drive to another drive. The exchange or transfer of parameter groups from 1 drive to another is achieved by uploading the parameter first to the keypad, and then the keypad is integrated to another drive. The parameter groups are downloaded to the drive. The keypad display is capable of displaying 3 actual controlled values instantly. This configuration determines if the users can replace the values being controlled with other values.
The Cutler-Hammer SVX020A2-5A4N1 Adjustable Frequency Drive cover should not be opened immediately after disconnecting the power supply to the system and this is because some devices within the drive remain at a hazardous voltage risk for a period of time. The Cutler-Hammer SVX020A2-5A4N1 Adjustable Frequency Drive typically monitors an induction motor in an open loop vector control mode. The Cutler-Hammer SVX020A2-5A4N1 Adjustable Frequency Drive should be connected to the utility power and the power source. For initial powering up, the Cutler-Hammer SVX020A2-5A4N1 Adjustable Frequency Drive, the users should enter the Start-Up Wizard that will guide the users through the basic parameter setup and application selections. The Profibus Network Card configuration is designed for connecting the Cutler-Hammer SVX020A2-5A4N1 Adjustable Frequency Drive as a slave on a Profibus-DP network. The connection of the Profibus Network Card and the Cutler-Hammer SVX020A2-5A4N1 Adjustable Frequency Drive is achieved by a 9-pin DSUB connector.
| Manufacturer | Eaton Cutler-Hammer |
| Brand | Eaton Cutler-Hammer |
| Part Number/Catalog No. | SVX020A2-5A4N1 |
| Product Type | Adjustable Frequency Drive |
| Product Family | Open Drives |
| Horsepower | 20 Horsepower |
| AFD Software Series | Standard |
| Enclosure | NEMA Type 12 |
| Voltage | 575 Volts AC |
| Kepyad Type | Alphanumeric |
| Input Option | 3-phase, EMC L |
| Brake Chopper Option | No Brake Chopper Circuit |
| Board Modifications | Standard Boards |
| Frame Size | FR6 |
| Supply Frequency | 50 to 60 Hertz |
| Inputs | 2 Analog, 6 Digital |
| Outputs | 1 Analog, 1 Digital, 2 Relay |
| Manufacturer | Eaton Cutler-Hammer |
| Brand | Eaton Cutler-Hammer |
| Part Number/Catalog No. | SVX020A2-5A4N1 |
| Product Type | Adjustable Frequency Drive |
| Product Family | Open Drives |
| Horsepower | 20 Horsepower |
| AFD Software Series | Standard |
| Enclosure | NEMA Type 12 |
| Voltage | 575 Volts AC |
| Kepyad Type | Alphanumeric |
| Input Option | 3-phase, EMC L |
| Brake Chopper Option | No Brake Chopper Circuit |
| Board Modifications | Standard Boards |
| Frame Size | FR6 |
| Supply Frequency | 50 to 60 Hertz |
| Inputs | 2 Analog, 6 Digital |
| Outputs | 1 Analog, 1 Digital, 2 Relay |