Eaton Cutler-Hammer
Eaton Cutler-Hammer Drives
Eaton Cutler-Hammer PLC
Eaton Cutler-Hammer Circuit Breakers
Allen Bradley Panelview
Allen Bradley PLC
GE Fanuc
Urgent Automation is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply.
Product comes with Urgent Automation's 1-year warranty.
Rockwell Disclaimer: The product is used surplus. Urgent Automation is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Urgent Automation is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, Urgent Automation makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Urgent Automation also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Urgent Automation also makes no representations as to your right to install any such firmware on the product. Urgent Automation will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Urgent Automation is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply.
Product comes with Urgent Automation's 1-year warranty.
The W200M1CFC Cutler Hammer is a NEMA Contactor/Starter Eaton Drive. It belongs to the W200 series and has a motor voltage of 200 with a maximum hp of 1. Its enclosure must be size 1 and its coil voltage is around 120. With around 60 Hertz, this module is a 3-Phase unit with 3 poles.
The W200M1CFC is a motor starter designed and manufactured by Eaton Cutler-Hammer. The starter employs a microprocessor that accurately monitors the current to protect the motor against overcurrents and overload. This feature allows the motor to be maximally used without nuisance tripping and without motor damage. The W200M1CFC, since it belongs to the Eaton Advantage series, provides standard overload protection functions which also includes phase loss and phase unbalance protection. Starters in the Eaton Advantage series provide a cost-effective way to initiate communication. They also have On and Off commands, status indicators, and motor data that can be linked to automated control systems without the need for extra sensors.
The Eaton Cutler-Hammer W200M1CFC is listed by the Underwriters Laboratories and approved by the American Bureau of Shipping (ABS). To provide phase loss protection, the W200M1CFC, like other Eaton Advantage motor starters, will trip after 2 seconds of phase loss. The starter will sense a phase loss if the current in any one phase falls below 1.15 Amps. The W200M1CFC has a NEMA size 1 rating. Advantage starters with this size rating have an AC coil burden (inrush) of 250 Volts Amps, a closed wattage of 5 Watts, 78 Volts of pick up, and 60 Volts of drop out. The W200M1CFC measures 6.50 inches in height, 2.50 inches in width, and 4.96 inches in depth. The panel area measures 16.25 square inches. When wiring the W200M1CFC, copper wires are recommended. Also, the wires should not exceed a size of 8.0 AWG. For the auxiliary electrical circuit, a wire not exceeding 12 AWG should be used.
| Manufacturer | Eaton Cutler-Hammer |
| Brand | Eaton Cutler-Hammer |
| Manufacturer | Eaton Cutler-Hammer |
| Brand | Eaton Cutler-Hammer |