Eaton Cutler-Hammer
Eaton Cutler-Hammer Drives
Eaton Cutler-Hammer PLC
Eaton Cutler-Hammer Circuit Breakers
Allen Bradley Panelview
Allen Bradley PLC
GE Fanuc
Urgent Automation is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply.
Product comes with Urgent Automation's 1-year warranty.
Rockwell Disclaimer: The product is used surplus. Urgent Automation is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Urgent Automation is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, Urgent Automation makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Urgent Automation also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Urgent Automation also makes no representations as to your right to install any such firmware on the product. Urgent Automation will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.
Urgent Automation is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply.
Product comes with Urgent Automation's 1-year warranty.
The W250M2CNC Cutler Hammer is a NEMA Contactor/Starter Eaton Drive. It belongs to the W200 series and has a motor voltage of 230 with a maximum hp of 1. Its enclosure must be size 1 and its coil voltage is around 110. With around 50 Hertz, this module is a 3-Phase unit with 3 poles.
The Eaton Cutler-Hammer W250M2CNC starter is one of the available starters from the Eaton W200 product series. This series provides great flexibility and a number of protective features that protect valuable equipment and reduce the overall costs. The Eaton Advantage starters feature the ground current sensing protection that enables protection against low level/lockout ground currents, phase unbalance protection without the usual required time delay for reset, and phase loss protection. Most of these protective features come as standard options with these devices and they can be adjusted through special Advantage Programming Module (APM). The Eaton Advantage product series provides many benefits through competitive pricing, an extended operating life, smaller starter sizes than conventional motor starters, motor overcurrent protection, enhanced communication capability, increased accuracy, pre-start diagnostics, current sensing monitoring, energy-balanced contact closure system, and an advanced coil control. All of these features and functions make these drives more versatile in comparison to other similar products that are available in the global market and they set the standard for motor control.
The W250M2CNC Eaton Advantage starter has a motor voltage of 200 Volts AC and it features a frame size of 2. The maximum power output of the drive is 10 Horsepower and its coil voltage is 120 Volts AC. Besides that, the drive has an input frequency of 60 Hertz and 45 Amps of continuous current when it is enclosed. The W250M2CNC starter unit is a reversing or vertical unit and it does not require heaters. The 3-pole drive is NEMA rated and it is wired for separate control. Other available types of these starters include the non-reversing and reversing or horizontal types. The operating ambient temperature range of the W250M2CNC starter unit should be between -40 and 40 degrees Celsius (-40 and 104 degrees Fahrenheit) range while its storage temperature ranges from -40 to 100 degrees Celsius (-40 to 212 degrees Fahrenheit). The dimensions of the unit include 165.1 millimeters (6.5 inches) in height, 63.5 millimeters (2.5 inches) in width, and 126 millimeters (4.96 inches) in depth.
| Manufacturer | Eaton Cutler-Hammer |
| Brand | Eaton Cutler-Hammer |
| Manufacturer | Eaton Cutler-Hammer |
| Brand | Eaton Cutler-Hammer |