W250M3CFC

Urgent Automation is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply.

Product comes with Urgent Automation's 1-year warranty.

Rated 4.6 with 14 reviews

Rockwell Disclaimer: The product is used surplus. Urgent Automation is not an authorized surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorized dealers. Because Urgent Automation is not an authorized distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, Urgent Automation makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Urgent Automation also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Urgent Automation also makes no representations as to your right to install any such firmware on the product. Urgent Automation will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.


W250M3CFC

Description: The W250M3CFC Cutler Hammer is a NEMA Contactor/Starter Eaton Drive. It belongs to the W200 series and has a motor voltage of 200 with a maximum hp of 1. Its enclosure must be size 1 and its coil voltage is around 120. With around 60 Hertz, this module is a 3-Phase unit with 3 poles.

Urgent Automation is NOT an authorized distributor for this manufacturer and therefore the manufacturer’s warranty does not apply.

Product comes with Urgent Automation's 1-year warranty.


Description:

The W250M3CFC Cutler Hammer is a NEMA Contactor/Starter Eaton Drive. It belongs to the W200 series and has a motor voltage of 200 with a maximum hp of 1. Its enclosure must be size 1 and its coil voltage is around 120. With around 60 Hertz, this module is a 3-Phase unit with 3 poles.




Rated 4.6 with 14 reviews







About W250M3CFC

The Eaton W250M3CFC is a W200 or Advantage motor starter. The W200 series is developed by Eaton Cutler-Hammer, one of the global leaders in manufacturing industrial devices in terms of quality, distribution, and control. This product family offers devices that are significantly smaller in size than other similar devices on the market, that have a long operating life, and that have many protective features and a built-in communication module that enables 2-way control. Eaton Cutler-Hammer produces contactors and starters with the NEMA rating and since the W250M3CFC is a starter unit, it is NEMA-rated and available as a non-reversing unit or as a reversing one (either horizontal or vertical). In addition to that, it can work with accessories such as a DeviceNet communication module, a bell alarm module, auxiliary contact modules (type W), a DIN rail adapter kit, a baseplate kit, an internal trip indicator, and mechanical interlock kits.

The W250M3CFC motor starter unit comes in a size 3 frame and it includes a motor voltage of 200 Volts AC. The maximum power output of the starter drive is 25 Horsepower while its continuous amperage when it is enclosed is 90 Amps. Also, it should be mentioned that the drive features 120 Volts of coil voltage and an input frequency of 60 Hertz. Besides that, this unit has 3 poles and it is wired for separate control. In addition to that, heaters are not required for this type of drive. The W250M3CFC starter includes protective features such as phase unbalance, phase loss, and ground current protection. The ambient temperature rating of the W250M3CFC unit is -40 to 40 degrees Celsius (-40 to 104 degrees Fahrenheit) and its storage temperature should be between -40 and 100 degrees Celsius (-40 to 212 degrees Fahrenheit). The vertical reversing W250M3CFC W200 starter has dimensions that include a height of 203.2 millimeters (8 inches), a width of 93.5 millimeters (3.68 inches), and a depth of 166.1 millimeters (6.54 inches).


Technical specifications:


ManufacturerEaton Cutler-Hammer
BrandEaton Cutler-Hammer
ManufacturerEaton Cutler-Hammer
BrandEaton Cutler-Hammer
Common misspellings:
  • W25oM3CFC